Car Engine Silicone Pad Heater

Specifications

• Material: Silicone rubber + fiberglass cloth

• Wire length: 200cm

• Color: orange

• Installation: 3M double side tape

• Overheat protection: 194 ° f/90 ° C

• Using range: All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulation

• Easy to Use: Clean the surface; Peel off the backing paper; apply the silicone heater pad to the surface cleaned making sure no gap or air bubbles trapped under the pad. Plug power cord into any wall outlet. Note: The engine heating pad is designed to be used on the metal surface to heat the fluid, and do not use it on any plastic surface on the engine

• Keep the Engine Warm: In every cold winter, using this heater can quickly start the engine to maintain good engine oil temperature and improve engine performance. Use the silicone heater pad to heat up engine oil about 15 minutes. The oil temperature will be heated up to 194 degrees Fahrenheit (90 ℃), which will be easy to start your car

• Temperature Protection: When the temperature exceeds 194 F/90 C, the universal heating pad will automatically turn off. When the temperature drops to around 40 C, restart heating to avoid safe issues caused by high temperatures

• Features: Silicone rubber heating board is composed of silicone rubber and glass fiber cloth, high insulation performance, safe use. It is wear -resistant, heat -resistant, waterproof and oil -proof, not easy to be corroded, which can have a longer service life. Line length 2m, fast heating

• WIDELY USE: The silicone heater pad is widely use on RVs, campers, trailers, boats, and ships in winter, which is installed in engine oil pan, oil tank, reservoir, transmission oil pan and so on